2014. 09 - 2020. 06 上海交通大学 机械工程 博士
2010. 09 - 2014. 06 西安交通大学 机械工程及自动化 学士

2023. 03 至今 上海交通大学 UFC外围平台 助理教授
2020. 07 - 2023. 02 上海交通大学 UFC外围平台 博士后

激光诱导热力效应
激光驱动微滴增材
激光驱动微球冲击

(1) 国家自然科学基金委员会, 青年科学基金项目, 52205488, 脉冲激光驱动金属微滴高冷却速率沉积机
理及其累积效应调控, 2023-01-01 至 2025-12-31, 主持
(2) 国家自然科学基金委员会, 联合基金项目, U21A20135, 高能重频激光冲击成形高应变率形变机理与柔
性精确控形方法, 2022-01-01 至 2025-12-31, 参与

2023年
[1] Yifei Peng*, Guohu Luo*, Yongxiang Hu, et al. Dynamic deformation mechanism in submicro-laminated copper with interlamellar graphene multilayers[J], Acta Materialia, 2023, 252, 15, 118941. (共一作, 中科院一区)
[2]Guohu Luo, Di Wu, Yongxiang Hu, et al. A unified analytical model for the flight distance of flying microdroplet before solidification [J], Advanced Powder Technology, 2023, 34, 103934.
[3] Yu Zhou, Guohu Luo, Yongxiang Hu*, Di Wu, Cheng Hu. Femtosecond laser printing patterned nanoparticles on flexible substrate by tuning plasmon resonances via polarization modulation [J]. International Journal of Machine Tools and Manufacture, 2023, 189: 104040. （中科院一区）
[4]Yifei Peng*, Guohu Luo*, Jiayu Chen, Yongxiang Hu*, Dingbang Xiong*. Enhanced Energy Dissipation of Graphene/Cu Nanolaminates under Extreme Strain Rate Ballistic Perforation [J]. Composites Part A: Applied Science and Manufacturing, 2023, 172: 107611. (共一作，中科院一区)
[5]Di Wu, Guohu Luo, Yongxiang Hu*, Yu Zhou, Meng Chen. Printing regime for single metal microdroplet deposition in laser-induced forward transfer [J]. Optics and Lasers in Engineering, 2023, 167: 107617.
[6]Di Wu, Yongxiang Hu*, Guohu Luo, Yu Zhou. Tilting Behaviors of Metal Microjet in Laser-Induced Forward Transfer [J], ASME. J. Manuf. Sci. Eng. March 2024; 146(3): 031005.

2022年
[1]Guohu Luo, Di Wu, Yongxiang Hu, et al. Laser printing of large-scale metal micro/nanoparticle array: Deposition behavior and microstructure [J], International Journal of Machine Tools and Manufacture, 2022, 173, 103845. （中科院一区）
[2]Guohu Luo, Di Wu, Yongxiang Hu, et al. Elucidating ejection regimes of metal microdroplets in voxel-based laser-induced forward transfer [J], Additive Manufacturing, 2022, 55, 102814. （中科院一区）
[3]Yifei Peng*, Guohu Luo*, Yongxiang Hu, et al. Extreme strain rate deformation of nacre-inspired graphene/copper nanocomposites under laser-induced hypersonic micro-projectile impact [J], Composites Part B: Engineering, 2022, 235, 109763. (共一作，中科院一区)

2021年
[1]Guohu Luo, Zhenqiang Yao. Decoupling tests on axial heat-transfer in highly turbulent Taylor-Couette flow using thermal waves [J], Experimental Thermal and Fluid Science, 2021, 128, 110439.
[2]Guohu Luo, Zhenqiang Yao, Investigation on the radial heat-transfer of pumping secondary flow in semi-closed rotating disk cavity [J], Journal of Heat Transfer-Transactions of the ASME, 2021, 143(1): 011801.
[3]Yu Zhou, Guohu Luo, Yongxiang Hu, et al. Interaction properties between molten metal and quartz by molecular dynamics simulation[J]. Journal of Molecular Liquids, 2021, 342(18):117474.

2019年
[2]Guohu Luo, Zhenqiang Yao, Hong Shen. Mechanism of pressure oscillation in Taylor-Couette-Poiseuille flow with abruptly contracting and expanding annular gap, Physics of Fluids, 2019, 31, 096583. （Editor's Pick）

2018年
[1]Guohu Luo, Zhenqiang Yao, Hong Shen. A new hybrid turbulence model applied to highly turbulent Taylor-Couette flow [J]. Physics of Fluids, 2018, 30(6):065103.

研究生课程“弹性塑性力学”

[1] 胡永祥，罗国虎，吴迪，周榆，姚振强. 基于脉冲激光驱动的微滴三维打印系统及方法，2022-01-28，中国，ZL. 202110105753.9.
[2] 姚振强，罗国虎，王升德，金智毅，沈洪. 屏蔽电机飞轮罐状间隙腔室阻力矩解耦测试装置及方法，2019-09-24，中国，ZL. 201710084456.4.
[3] 姚振强，罗国虎，王升德，金智毅，沈洪. 基于间隙环流阻力特性的屏蔽电机主泵飞轮结构优化方法, 2020-10-16，中国，ZL. 201710084443.7.
[4] 姚振强，罗国虎，王升德，沈洪，薛亚波，成德. 泰勒库特流轴向传热测试装置及其测试方法，2018-05-11，中国，ZL.201610039852.0.
[5] 姚振强，王升德，罗国虎，沈洪. 屏蔽式核主泵冷却系统的温度分布测定方法，2018-07-03，中国，ZL. 201610091924.6.

[1] 上海市超级博士后计划, 上海市人力资源和社会保障局, 2020
[2] 三代核主泵屏蔽电机浸液转子系统力热安全设计的关键技术创新, 中国核能行业协会,技术发明一等奖, 2020(排5)